DeLonghi Pinguino F16DGT Betriebsanleitung Seite 25

I 24-07-2001 15:59 Pagina 25
THE LEDS
Led displays come on depending on the selected function or as warning of possible anomalies.
FUNZIONE
OFF
AIR-CONDITIONING
DEHUMIDIFYING
PURIFYING
HEATING
FULL AUTO
TIMER
ANOMALY
DIRTY FILTERS (1)
ALARM
(1) A flashing LED indicator means that the anti-bacterial filters need cleaning. To switch off the
LED indicator, after having cleaned the filters, press the manual function button until a beep
followed by a double-beep is heard. This procedure can be carried out also while the unit
is operating.
FORCED OPERATIONS
This is a way of operating to be selected if there are problems with the remote control (broken or
lost, or the batteries run-down).
14
Push the button
operational procedures (air-conditioning, dehumidifying, ventilation, full auto, turn off) with an
automatic setting.
Warning lights/
Forced operations
RED LIGHT 11
-
-
on
-
on
As soon as this function is selected, all LED displays will remain on for some seconds until the control
unit selects which mode to function in (whether air-conditioning, dehumidifier, fan or heater).
All 3 LEDs remain on when machine is off, if at least one TIMER function is selected.
RED LIGHT 11
-
blinking
to start the unit and then press it again to get the sequence of the different
YELLOW LIGHT 12 GREEN LIGHT
-
-
-
on
-
YELLOW LIGHT 12 GREEN LIGHT
blinking
blinking
13
-
on
on
-
-
13
-
blinking
25