Installing The Reserve Parachute; Main Container Specification; Folding The Reserve Parachute In The Pod - SUPAIR DELIGHT 4 SPORT Betriebshandbuch

Harness user's manual | DELIGHT 4 SPORT
Thank you for reading the following carefully ! We recommend for the initial rescue parachute assembly and installation to be made
by a qualified professional.
Reserve parachute folding and installation inside the harness must conform to the specific guidelines found in this manual.
The volume of the rescue parachute may change depending on the packing. We have checked the compatibility of our rescue
parachutes. Other rescue parachutes may be compatible, but you must ensure that the system works properly.
Main Container specifications
Folding the reserve parachute in its pod
Warning: the DELIGHT 4 SPORT S & M must be used with a S/M reserve parachute pod
the DELIGHT 4 SPORT L & XL must be used with a L/XL reserve parachute pod
The reserve parachute must be set in the DELIGHT 4 SPORT specific pod.
1
Prepare the reserve parachute next to the pod in order to transfer it.
Revision index: V1 25/08/2022
• Zipper + flaps locked by handle's cables
• Volume from 2.9 to 5.5 litres
• Adapted to the reserve parachutes SU-
PAIR SHINE, FLUID LIGHT and FLUID
LIGHT EVO as well as other solo reserve
parachutes.

INSTALLING THE RESERVE PARACHUTE

DELIGHT 4 SPORT in S and M sizes
Compatible
parachutes
SHINE
FLUID LIGHT
EVO
2 Open the original reserve parachute pod
DELIGHT 4 SPORT L and XL sizes
Compatible
S M L
parachutes
* SHINE
FLUID LIGHT
EVO
SUPAIR | DELIGHT 4 SPORT| page 20
S M L