SUPAIR DELIGHT 4 SPORT Betriebshandbuch Seite 100

Harness user's manual | DELIGHT 4 SPORT
Without twisting the risers, connect them to the
harness attachment loops using the self-locking
carabiners.
Check for the risers to be properly positioned and
untwisted. The «A» risers must be located at the
front and facing the flight direction (see diagram).
Lastly, check for the main self-locking carabiners to
be fully closed and locked in place.
Install the speedbar by following the instructions found previously.
Connect it to the wing using the split hooks.
Once the speedbar is connected, adjust its length according to your measurements.
For correct use, there must not be any tension at the split-hook
level when the speedbar line is fully relaxed.
Revision index: V1 25/08/2022
RESERVE PARACHUTE/RISERS
Connecting harness/risers
Connecting speedbar
Flight direction
Edelrid FORAS
carabiners
SUPAIR | DELIGHT 4 SPORT| page 39