Modes Of Operation - Delonghi One Inverter 9K Installationsanleitung

MODES OF OPERATION

Mode of operation
ON/OFF On/Off/Stand-by.
The symbol
display when the conditioner is switched on
Every time the FAN button is pressed the
speed changes in the following sequence:
AUTO - LOW – MEDIUM – HIGH. If you
FAN
select the AUTO FAN speed, the electronic
(Fan Mode)
control chooses the fan speed automatically.
In AUTO mode, the electronic control
chooses the operating mode (COOLING
or HERATING) and the fan speed.
Adjustment of airflow. Press the "SWING"
button to start the automatic swing of the
airflow direction flaps; press the "SWING"
button again to stop the movement. If the
SWING
appliance is operating in the HEAT mode
when the "SWING" button is pressed, the
start of this function will be deliberately
delayed for a few seconds to ensure the
immediate outflow of warm air for user
comfort (Hot-Start function).
Mode of operation selection. Every time
the MODE button is pressed the mode of
operation changes in the following sequence:
MODE
COOLING – DRY – FAN – HEATING –
SMART.
(F Logic)
Note: on the B Logic remote control the
sequence is: COOLING – DRY – FAN -
HEATING
SMART
Activation of the automatic mode of
operation (SMART)
(B Logic)
Setting of temperature. Press once to raise
by 1°C.
TEMP
Available range of temperature settings:
DN/UP
HEATING
COOLING
DEHUMIDIFYNG
FAN
Do not turn the vertical airflow direction flaps by
hand, since this could cause malfunctioning. In the
case of flap malfunction, first of all switch off the
appliance, disconnect it from the power supply and
then reconnect it.
Adjustment of horizontal airflow (manual)
To change the angle of the airflow, turn the adjusting cur-
Note: the unit shown here may be different from the air
conditioner you have purchased.
This adjustment must be done with the appliance
switched off.
ENGLISH
8
appears on the remote control
16°C ~ 30°C
16°C ~ 30°C
16°C ~ 30°C
16°C ~ 30°C
B-LOGIC
B Logic
Remote control
INTELLIGENT REMOTE CONTROL
°C
!
AUTO
ON TIMER
PM
AM
OFF TIMER
MODE
-
+
ON OFF
!
Note: the appliance will start in the mode of operation that
was selected before switching off.
Note: the appliance will start in the mode of opera-
tion that was selected before switching off.
USER
F-LOGIC
F Logic
Remote control
INTELLIGENT REMOTE CONTROL
°C
!
MODE
-
+
ON OFF
!
SINGLE SPLIT