Teac A-1D Bedienungsanleitung Seite 6

CD PLAYER (C-1D)
LINE
OUT
R L
A
R L
LINE
OUT
TUNER (T-1D)
A
LINE IN jacks
Connect the component with RCA pin cords. Make sure to
connect the white plug to the white jacks (Left) and the red
plug to the red jacks (Right).
L
R
< DIRECT IN jacks bypasses BASS and TREBLE control. Use
these jacks to enjoy the original sound.
B
PRE OUT jacks
By connecting an external power amplifier, you can
increase the number of available outputs and the output
levels.
C
POWER CONTROL
If you have TEAC T-1D, connect the POWER CONTROL jack
of each component with the power control cord (provided
with T-1D).
6
B
POWER
CONTROL
OUT
Connections (2)
L
R
C
D
AC OUTLETS
SWITCHED:
This outlet is active only when the unit is on.
UNSWITCHED:
Even when the unit is off, this outlet is active as long as the
power cord is connected to an AC outlet.
< The power consumption of the equipment connected to this
outlet should be less than 15 watts.
Caution:
Make sure that the total power consumption of all
equipment connected to the outlets on the amplifier does
not exceed 100 watts.
E
Power cord (AC)
Be sure to connect the power cord to an AC outlet which
supplies the correct voltage.
Hold the power plug when plugging or unplugging the power
cord.
ENGLISH
D
E