Waeco ASC 6100G Bedienungsanleitung Seite 20

EN
The report may contain a logo (e.g. the workshop logo) if a graphic is copied to the USB flash drive that meets the
following requirements:
• File format: JPEG format
• File name: logo.jpg (each letter in lower case)
• Screen size: 370 x 50 pixels
The company address in the report is taken from the A/C service unit
13.5.1 Annual reports
After the calendar year has changed, the A/C service unit indicates that the data stored from the previous
calendar year should be transferred to a USB flash drive. After transferring the annual data to a USB flash drive, it
is deleted from the A/C service unit's internal memory.
1. Insert the USB flash drive in the USB port.
2. Follow the instructions on the display.
13.5.2 Manual reports
You can at any time manually transfer a monthly or annual report to a USB flash drive.
1. Insert the USB flash drive in the USB port.
2. In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
3. Press ENTER
4. Use the cursor key
5. Enter the password and press
• : Monthly report
4910
• : Annual report
4918
If a USB flash drive has not been inserted or is not recognised, the Error 52 message appears.
6. Use the cursor keys
7. Follow the instructions on the display.
8. Switch back to the previous selection using
13.6 Displaying refrigerant consumption
The A/C service unit saves the data on the amount of refrigerant filled and extracted. You can print out this data
as an annual or monthly overview.
1. In the basic menu use the cursor keys
Short selection
Free selection
Other selections
ENTER-OK
2. Press ENTER
3. Use the cursor key
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
20
to confirm.
to select Service and press ENTER to confirm:
ENTER to confirm.
or to select the required entry and press
to confirm.
to select Service and press
(Entering the company data
or to select Other selections.
ENTER
STOP .
or to select Other selections.
ENTER to confirm.
on page 12).
to confirm.