Waeco ASC 6100G Bedienungsanleitung Seite 17

3. Use the cursor key
Flushing
Reset scales.
Service.
ENTER-OK STOP-EXIT
4. To acces the ADM administrator menu enter the password
Service.
5. Enter the administrator code
Insert ADM Code
Note For security reasons, a new administrator code must be selected each time, but not
will deactivate the entire function.
6. Enter the new administrator code:
ADM AREA
Insert new code
7. Confirm the new administrator code:
ADM AREA
Confirm new code
8. Use the cursor keys
ADM AREA
User number
9. Create the four-digit personal user code. Once a code is created here, the A/C service unit can then only be
operated using this code.
ADM AREA
User number
Insert new code
10. Confirm the new user code:
ADM AREA
User number
Confirm new code
Note To switch between upper and lower case use the yellow
to select Service and press
----
(default setting) and press
0000
----
----
----
or to select the user.
----
----
ENTER to confirm.
and press ENTER
9786
ENTER to confirm:
1
1
1
Info
to confirm.
0000
key.
EN
as this
17