Hama 00087687 Bedienungsanleitung Seite 9

Usb-wetterdatenstation

Seite von 25

/ 25
Lesezeichen

Verfügbare Sprachen

• Click to select "CITY 1", "CITY 2", "CITY 3" or "CITY 4" on the top of the program

• Click [SET LOCATION] to select the location

• Click [SAVE] to save & exit the setting. The PC program will automatically update the 4-day forecast of your selected city from the Internet

• To view the weather forecast of your preset city list, click the corresponding city number

NOTE: The forecast information of city 1, 2, 3 & 4 will not be sent to your main unit

Update forecast

Click [UPDATE FORECAST] to manually receive 4-day forecast from the Internet of your selected city.

Troubleshooting

1. Ensure that you are using Windows 2000, XP or Vista and your PC is connected to the Internet. Try browsing through a couple of websites to make sure.

You need to have Microsoft .NET Framework 1.1 driver installed in your Windows in order to complete the installation of the 4-day forecast PC program.

If this ﬁle was not installed in your Windows before, the PC installation program will redirect you to the Microsoft web site for download. You may also

go to below link to download the driver directly if you encounter any problem: http://download.netinfostation.com After .NET Framework 1.1 is installed,

run the NIS01_INSTALL.EXE (or INSTALL.EXE) installation program again.

2. Ensure that the USB transmitter is properly connected to the USB port of your PC. Otherwise, you are unable to run the PC program and access the

4-day forecast update from the Internet

3. Ensure all batteries in the main unit & USB transmitter are fresh. Replace battery when the respective low battery indicator appears on the main unit

(refer "LOW BATTERY INDICATION" section)

4. If the toolbar icon of the PC program disappears (not hidden) on the lower right of your Window, your program is terminated and no longer access 4-day

forecast from the Internet. Restart the program again

5. In the ﬁrst few minutes of the RF reception from USB transmitter, the main unit is showing data on one part of the screen and this is normal. The rest

of the screen display data will gradually appears in the next 10 minutes or more. If you have waited 1 hour or more without seeing the rest of the screen,

shorten the distance between the USB transmitter & main unit and check the battery levels. Then repeat the setup procedure in "Establish RF

connection with main unit" section. If it continues to fail, try removing the USB connection and all batteries from the USB transmitter. Reinstall the

batteries and then reconnect the USB connection again. Repeat the setup procedure in "Establish RF connection with main unit" section.

6. If the RF indicator is showing full strength

but one or more of the next 3 days' forecast is missing on the main unit & PC program, your PC may be

ofﬂine for many days. Connect your PC to the Internet again to receive the latest forecast update

7. If all forecast information appears except the UV Index, your PC may be ofﬂine for more than 1 day. Connect your PC to the Internet again to receive the

latest UVI forecast update

8. If the forecast reading of the PC program does not match with the main unit. Press [TRANSMIT] on the USB transmitter to re-transmit signal again and

wait for 10 minutes or more

9. If your time on the PC program & main unit is off by half an hour or more, click [SETTING...] on the PC program and set the hour offset until the proper

time is set.

10. If your city does not appear in the 20.000 city list, select the one near your home location

11. Heavy Internet trafﬁc may slow down the respond of the server temporary. Try later if you wish to update the forecast manually by the [UPDATE

FORECAST] button.

Battery disposal

Replace only with the same or equivalent type recommended by the manufacturer. Please disposal of old, defective batteries in an environmentally friendly

manner in accordance with the relevant legislation.

Speciﬁcations

Software:

Compatible with Windows 2000, XP & Vista (Microsoft .NET Framework 1.1 required)

USB:

1.1 or above

Transmission:

Up to 100M (330 ft.) in open area

Clock:

Auto-synchronized clock from Internet, Quartz back-up

Power:

AA x 6 pcs for main unit