Herunterladen Diese Seite drucken

Hama 00087687 Bedienungsanleitung Seite 7

Usb-wetterdatenstation

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
• After the installation is complete, run the program by double clicking the desktop "4-DAY FORECAST" icon. Then click [SETTING...]
in the HOME WEATHER display. Click [SET LOCATION] to enter your home city in the program.
• After setting your home location, 4-day forecast of your home city will be updated on your PC program automatically via the Internet. You may click
[UPDATE FORECAST] anytime to manually update the forecast display on the program. The program will also update the forecast and send to the main
unit automatically if your PC is online all the time or every time you turn on your PC.
NOTE: Refer to "Troubleshooting" section if you have any problems displaying the 4-day forecast information on your PC program.
Establish RF connection with main unit
• Before setting up the RF connection, please ensure that you have successfully received 4-day forecast on your PC program for your home city.
• Place the USB transmitter & main unit away from metal & source of interference such as PC monitor, mobile phones, appliances, TV etc. It is
recommended to start with a short distance (eg. within 0.5 meter) between the two units for initial RF setup. Once the RF connection is established, place
the main unit within the effective transmission range from the transmitter. Shorten the distance if necessary for best reception.
• To search for RF signal from a new USB transmitter, press [PC SEARCH] button on the main unit repeatedly until the RF icon
• Press [TRANSMIT] button on the USB transmitter to enforce transmitting RF weather data to the main unit
• Once the RF connection is established between the main unit & USB transmitter, the RF icon
few minutes of the RF reception, the main unit is showing data on one part of the screen and this is normal. The rest of the screen display data will gradu
ally appear in the next 10 minutes or more.
NOTE:
• If you have waited half an hour or more without seeing the rest of the screen, shorten the distance between the USB transmitter & main unit, check the
battery levels and repeat the setup procedure above
• If it continues to fail, try removing the USB connection and all batteries from the USB transmitter. Reinstall the batteries and then reconnect the USB
connection again. Repeat above procedure to set up the RF connection.
4-Day forecast information
Automatic forecast update
1) After your PC is turned on or rebooted, the PC program will access the Internet server for weather forecast update and start sending data to the main unit
automatically after around 5 to 30 minutes
2) If your PC is turned on all the time with Internet connection, weather forecast will be updated periodically from the Internet and send to the main unit
automatically.
(A) Weather forecast
4-day weather forecast with 28 different weather symbols:
PC Program
Main Unit
Description
clear
partly cloudy
partly cloudy with
light rain
partly cloudy with
light sleet
partly cloudy with
light snow
partly cloudy with
showers
partly cloudy with
sleet showers
12
Restart the installation program
(NIS01_INSTALL.EXE or INSTALL.EXE) again!
flashes.
with full strength will appear on the main unit. In the first
partly cloudy with
snow showers
partly cloudy with
thunderstorms
mostly cloudy
mostly cloudy with
light rain
mostly cloudy with
light sleet
mostly cloudy with
light snow
mostly cloudy with
showers
mostly cloudy with
sleet showers
mostly cloudy with
snow showers
mostly cloudy with
thunderstorms
overcast
overcast with light rain
overcast with light sleet
overcast with light snow
(G)
Main unit's display
(A) Weather forecast
(B) Hi/Lo TEMP
(C) Humidity
(D) Chance of precipitation
(E) UVI
(F) WIND
(G) RF Status
(H) Last update
(C)
(B) High/Low Temperature forecast
Press [C/F] button to select degree C or F. To view the high & low temperature for the next 3 days, press [MODE] repeatedly until HI & LO icons appear
(C) Average humidity forecast
Average humidity forecast is located next to the RH% icon. To view the average humidity for the next 3 days, press [MODE] repeatedly until "RH%" icon
appears.
(D) Chance of precipitation
The chance of precipitation in term of percentage is displayed next to the "PRECIP" icon. To view the precipitation forecast for the next 3 days, press
[MODE] repeatedly until "PRECIP" icon appears.
(E) Maximum UV Index forecast
The maximum UV index forecast is located next to the "UVI" icon. To view the maximum UV forecast for the next 3 days, press [MODE] repeatedly until
"UVI" icon appears.
UVI 1 to 2:
Maximum UV level is low. Low danger to the average person
UVI 3 to 5:
Maximum UV level is moderate. Moderate risk of harm from unprotected sun exposure
UVI 6 to 7:
Maximum UV level is high. High risk of harm from unprotected sun exposure
UVI 8 to 10:
Maximum UV level is very high. Very high risk of harm from unprotected sun exposure
UVI 11 to 15:
Maximum UV level is extreme. Extreme risk of harm from unprotected sun exposure
overcast with showers
overcast with sleet showers
overcast with snow showers
overcast with rain
overcast with sleet
overcast with snow
overcast with
thunderstorms
(A)
(B)
next 3 day's forecast
today's
forecast
(H)
(A)
(E)
(B) or (F) + (D) or (E) + (C)
(D)
(F)
13

Werbung

loading

Diese Anleitung auch für:

Wds-300