Synchronising With Additional Transmitters - Silvercrest STKK 16 B1 Bedienungsanleitung

Synchronising with additional trans-
mitters
The transmitter and receiver of this wireless
doorbell system are already synchronised with one
another at the factory . You can also expand this
wireless doorbell system with up to five additional
transmitters .
In order to synchronise additional transmitters with
the receiver, proceed as follows:
♦ Press and hold the signal type selection button
1 on the receiver for approx . 3 seconds .
You will hear a beep and the signal LED 4 will
flash blue twice .
♦ Now press the ringer button 7 on the transmitter
that you want to synchronise with the receiver .
You will hear another beep after 10 seconds and
the signal LED 4 will flash blue twice .
The receiver and transmitter are now syn-
chronised .
STKK 16 B1
GB │ IE │ NI │ 15 ■