♦
Write on one of the nameplates e . If marking
the nameplate e by hand, we recommend
using a waterproof pen .
♦
Pull the nameplate cover 9 upwards away from
the transmitter and place your nameplate 8
into the recess in the transmitter .
♦
Place the nameplate 9 back onto the transmitter .
♦
Place the transmitter on the wall bracket 0 so
that the retaining tabs on the wall bracket 0
protrude into the two openings on the back of
the transmitter . Then slide the transmitter towards
the ringer button 7 so that the retaining tabs
glide into the openings and the transmitter sits
firmly on the wall bracket 0 (see fig . 2) .
Fig. 2
■
18
│
GB │ IE │ NI
STKK 16 B1