Initial Operation; Delivery Status And Initial Operation - Selve Lineco-Serie Originalbetriebsanleitung

EN Initial operation

4. Initial operation

4.1. Delivery status and initial operation

For the operation blocking springs/burglar proof fixations and fixed stoppers trailing
edges are mandatory.
Switch off the power supply and connect the motor to the switch.
Operation Drive
If the running direction of the motor corresponds to 'Up' and
'Down' of the switch, initial operation is completed.
Perform a test run: The motor stops automatically at the end
positions and performs a short release.
Otherwise, switch off the power supply and swap the brown
and black connecting wires of the outputs of the switch. Initial
operation is completed.
Perform a test run: The motor stops automatically at the end
positions and performs a short release.
20