Install Li-Ion Battery - Kenwood UBZ-LJ9SETE Bedienungsanleitung

2.3 Install Li-ion battery

• Align the tabs on the battery cover with the slots on the transceiver, then hold the cover and press
up until you hear a "click".
• To remove the battery, please switch off the transceiver first, then press and hold the battery lock
button, slide the battery 5 mm backwards and then pull the battery up and out.
Attention!
• Only original batteries may be used.
• Do not short-circuit the connector terminals or expose the battery to high temperatures or fire.
• Do not try to open the housing of the battery pack.
• Do not install the battery in hazardous locations as sparks can cause an explosion.
7