Troubleshooting; Disposal - Kenwood UBZ-LJ9SETE Bedienungsanleitung

5. Troubleshooting

Notes on troubleshooting
Problem
The transceiver does not turn on.
If the battery is charged repeatedly, the battery
performance deteriorates.
You cannot hear or speak to the other group
members.
Other transceiver participants (except group
members) can be heard on the channel.
Note: If the problem persists, please contact the KENWOOD service.

6. Disposal

Disposal of used electrical and electronic equipment and batteries.
The crossed-out wheeled bin symbol on the product or its packaging indicates that this product
must not be treated as normal household waste, but must be returned to a collection point for the
recycling of electrical and electronic equipment and batteries. By helping to properly dispose of this
product, you are protecting the environment and the health of your fellow human beings. Improper
or incorrect disposal endangers the environment and health. For more information about the recycling
of this product, please contact your local authority or your municipal waste disposal service.
Information on disposal in Turkey can be found in Turkish on page 18.
16
Solution
• The battery is discharged. Charge the
battery or replace the batteries.
• The battery is not inserted correctly. Remo-
ve and reinsert the battery.
• The battery life is exhausted. Replace the
battery with a new one.
• Make sure you are using the same channel
and QT/DQT settings as the other group
members.
• The other group members are too far away.
Make sure you are within range of the other
transceivers.
• Change the QT/DQT settings. Make sure
that all group members change the settings
on their transceivers to match the new QT/
DQT settings.