Zamenjava Svetilk - Beko HCA63640B Bedienungsanleitung

3 Delovanje naprave

3.6 Zamenjava svetilk

Izključite napravo iz omrežne napetosti. Naprava
je opremljena s halogenskimi svetilkami 3W.
Halogenske svetilke zamenjate tako, da pritisnete
dol svetilko zadaj na nosilcu, tako da se svetilka
iztakne. Nato jo zavrtite v nasprotni smeri urnega
kazalca za 1/4 obrata in vzemite ven. Novo svetilko
namestite v obratnem vrstnem redu navodil zgoraj.
MAX 3 W
C
Svetilke nabavite na pooblaščenem
servisu.
Žarnica
Moč žarnice 3 W
Držalo/vtičnica GZ 10
Napetost žarnice
220 - 240 V
Velikost
53 x 50 mm
Koda ILCOS
DR/F3-220-240-GZ10-50-53
Svetlobni tok
260 lm
Korelirana barvna
3000 K
temperatura
Ta izdelek vsebuje svetlobni vir razreda energijske
učinkovitosti "F".
Napa / Priročnik o uporabi
3.7 Operation with chimney
connection
• Vapour is extracted through the
flue duct, which is fastened to
the connection head on the
hood.
• The diameter of the flue duct must be the same
as the connection ring. In horizontal settings, the
pipe has to have a slight upward slope (around
10º) so that the air can exit the room easily.
3.8 Operation without chimney
connection
•
Air is filtered through the carbon
filter and recirculated in the
room. Carbon filter is used
when it is impossible to use a
flue in the house.
• In flueless use, remove the flaps inside the flue
adapter.
• Remove the Grease filter. To install the carbon
filter, fit the filter to the tabs by centring it on
the plastic piece on both sides of the fan body.
tighten it by turning right or left.
• Replace Grease filter.
139 / SL