VANTRUE Element 2 Bedienungsanleitung Seite 32

EN detection, motion detection, low bitrate recording, and low framerate
mode) can only be enabled one at a time. When one is enabled, the
other will be automatically disabled.
4. All videos recorded in parking mode(Collison Detection, Motion Detec-
tion, Low Bitrate Recording, Low Framerate mode) will be saved in the
normal video folder. In order to prevent the video in parking mode from
being overwritten in a loop, please check and save the required files in
time to prevent loss.
Collision Detection
When collision detection is enabled, the
recording interface, indicating that the camera is currently using collision
detection mode. Collision detection sensitivity can be adjusted from 1 to
5 levels. You can adjust according to your habits, as well as the surround-
ings of the car.
When the Collision Detection is turned on, and no movement is detected
after 5 minutes of recording (5-minute entry mechanism for short), then
Collision Detection is activated with a
and the camera automatically turn off. When the dash cam is turned off, it
will start to record for 1 minute after being shaken, then turn off the dash
cam again.
1440P+1440P 30FPS
00:00:37 14:39:07
- 27 -
icon will be displayed on the
80
06-20-2022 MP/H
icon in the middle of the screen,