SELFSAT SNIPE BT Grey Line Bedienungsanleitung Seite 8

Remote control : Mobile application
Remote control : BT Remote control (separate purchase)
RCU
Using the remote control app, operate the antenna,
change the satellites to receive, and even update the
firmware if necessary.
Download the "SNIPE CONNECT" app from the App Store
(Android/iOS).
In order to operate SNIPE BT Grey line using the app, the
antenna must be paired with the "SNIPE CONNECT" app.
SET/ON button
When using the remote control, press this button to
Display screen
activate the remote control.
It is used to confirm the selected menu with the same
button as the SET button on the controller.
BT button
Pairing antennas
with remote controls
(RCU) OFF
(RCU) OFF Used to turn off the remote control immediately.
Turn off
Even if do not press this button, the screen turns off
the remote control
if do not use the remote control for more than 10 seconds.
HOME button
To use it again, press the SET/ON button.
SET/ON button
BT button
Arrow button
Button for pairing the antenna and BT Remote control.
DiSEqC button
HOME button
Move the antenna to the HOME position.
Bracket
◀, ▶ (Arrow) button
Select the desired menu with the arrow buttons. Same as
the arrow buttons on the controller.
DiSEqC button
Turn on/off the DiSEqC function.
[D] is displayed at the screen when the DiSEqC function is
activated.
ENGLISH - 6
Android QR CODE iOS QR CODE