SELFSAT SNIPE BT Grey Line Bedienungsanleitung Seite 14

4
Setting page
Check the firmware version of the antenna and mobile app.
Can delete the MAC address of a registered product.
To register a new product, return to the available devices .
Can change the language of the app to the language you use.
Setting button
Go to the settings page where can configure settings for the app.
Status display window
Indicates the current status of the antenna.
Satellite selection window
Select a satellite to search. The pre-programmed satellite is ASTRA1,
which can be changed to the desired satellite via the APP.
Used to move the antenna to the HOME position
The orange lamp blink while the antenna moves to the HOME position,
and the green lamp turns on after it has completely moved to the
HOME position.
Used to searching satellites
Select the desired satellite and press the button, the antenna will search
for it. While searching for a satellite, the orange lamp flashes, and when
a satellite is found, the green lamp lights up.
F/W Update
Used to update the antenna firmware and satellite information
Do not close application or power off the antenna while the update is
in progress.
The update will take approximately 5-10 minutes.
Used to set DiSEqC support of set-top box.
When DiSEqC is set, the orange lamp turns on and supports DiSEqC in
the set-top box.
ENGLISH - 12
5