CONDTROL XLiner Pento 360 Bedienungsanleitung Seite 12

Pento 360 / Quattro 360 G / Pento 360 G
EN
CROSS LINE LASER
2. Turn the instrument by 180°, mark the point where laser lines
intersect each other on the opposite wall as В2. (see Fig. В).
B
3. Move the instrument to the opposite wall B and set it in such a way
so that the point where laser lines intersect each other would be on the
same level with point B2. (see Fig. C).
C
12 12
user manual