CONDTROL XLiner Pento 360 Bedienungsanleitung Seite 13

Pento 360 / Quattro 360 G /Pento 360 G
EN
CROSS LINE LASER
4. Turn the instrument by 180°, direct the instrument to the wall А in
such a way so that the vertical line would coincide with point А1. Mark
the point of intersecting laser line on the wall А a s A3. (see. Fig. D).
D
5. Measure distance d between points А1 and А3 (see. Fig. D). If this
distance exceeds 2 mm, please contact service center.
user manual
13 13