Operating the graphical user interface
•
After you have successfully connected and commissioned the controller, you can control
and monitor the motor via the Graphical User Interface (GUI).
•
To do this, open the „Control_Program*.exe" application in the software package.
You should then get the following screen:
2
2
3
1. first establish the connection GUI with the controller.
•
Select the CAN adapter
•
Press the [Initialize] button
After successful connection you should immediately see the live data of the controller in the GUI.
•
These would be e.g. the present voltage as well as
•
The operating mode and
•
The FW versions
•
By activating „Debug Info" sensor values will be shown to you.
In the screenshot you can see that we control via CAN and have selected Current Control as ope-
rating mode.
In the next step we switch on the controller by pressing the [ON] button.
Brushless DC Controller HST-350
Orginal operating manual
1
2
Mounting and commissioning
Page 57 of 62
Rev1.3