Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1. Important basic information
1.1 About these operating instructions
These operating instructions contain information on the safe operation of this product.
Read these operating instructions and the safety instructions contained carefully before commis-
sioning the controller.
This information is intended for persons who perform tasks with or in connection with the product.
1.2 General description of the product
The product is a high-end speed controller for brushless DC motors.
Trapezoidal (BLDC) or field oriented control (FOC) are possible.
Overview:
•
Sensor / sensorless / hybrid operating mode
•
Auto-timing (phase shift programmable)
•
Fully controlled acceleration and braking current (recuperation current control)
•
Input voltage 9-58.8V
•
120A RMS (phase current limiting)
•
200A peak overcurrent protection VDS (short circuit protection)
•
PWM control
•
Current control
•
RPM control
•
Generator operation
•
designed according to automotive standard (+85°C, IPC67)
•
reverse polarity protection
•
integrated capacitor precharging (defined charging current, charging gradient monitoring, time
out)
•
all IO-PINs are SCG, SCB, OL protected
•
MOSFET temperature measurement
1.3 Scope of validity of the operating instructions
This manual is valid for the following product:
•
For all controllers of the HST-120 series
1.4 Target group
The activities described in these operating instructions may only be carried out by qualified per-
sonnel. (See chapter „Safety").
Brushless DC Controller HST-120
Orginal operating manual
Important basic information
Page 26 of 45
Rev1.3
Werbung
Inhaltsverzeichnis
