VONROC CS504DC Bersetzung Der Originalbetriebsanleitung Seite 8

EN
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
e) Do not use a battery pack or tool that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behaviour
resulting in fire, explosion or risk of injury.
f) Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explo-
sion. NOTE The temperature „130 °C" can be
replaced by the temperature „265 °F".
g) Follow all charging instructions and do not
charge the battery pack or tool outside the
temperature range specified in the instruc-
tions. Charging improperly or at temperatures
outside the specified range may damage the
battery and increase the risk of fire.
6) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the
power tool is maintained.
b) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorized service providers.
TELESCOPIC CHAIN SAW SAFETY WARNINGS
a) Keep all parts of the body away from the saw
chain. Do not remove cut material nor hold ma-
terial to be cut when the saw chain is moving.
Make sure the tool is switched off and the bat-
tery is removed when clearing jammed material.
A moment of inattention while operating the
chain saw may result in serious personal injury.
b) Hold the power tool by insulated gripping
surfaces only, because the saw chain may
contact hidden wiring. Saw chains contacting a
"live" wire may make exposed metal parts of the
product "live" and could give the operator an
electric shock.
c) Maintain a firm grip with both hands and position
your body and arm to allow you to resist any kick-
back forces. Kickback forces can be controlled by
the operator, if proper precautions are taken. Do
not let go of the telescopic chain saw.
d) When cutting a branch be alert for kickback.
When the branch is broached it can bend down
and jam the saw chain.
8
e) Carry the chain saw switched off, always with
both hands and the saw chain cover fitted.
Proper handling of the chain saw will reduce
the likelihood of accidental contact with the
moving saw chain.
f) Do not operate the telescopic chain saw in a
tree. Operation of a telescopic chain saw while
climbing or situated in a tree may result in
personal injury.
g) Always keep proper footing and operate the
chain saw only when standing on fixed, secure
and level surface. Slippery or unstable surfaces
such as ladders may cause a loss of balance or
control of the chain saw.
h) Follow instructions for lubricating, chain ten-
sioning and changing accessories. Improperly
tensioned or lubricated chain may either break
or increase the chance for kickback.
i) Keep handles dry, clean, and free from oil and
grease. Greasy, oily handles are slippery caus-
ing loss of control.
j) Cut wood only. Do not use the telescopic chain
saw for purposes that it is not intended for.
Example: do not use the chain saw for cutting
plastic, masonry or other non-wooden building
materials. Use of the telescopic chain saw for
operations different than intended for could
result in a hazardous situation.
k) Causes and operator prevention of kickback:
– Kickback may occur when the nose or tip
of the guide bar touches an object, or when
the wood closes in and pinches the saw
chain in the cut.
– Tip contact in some cases may cause a
sudden reverse reaction, kicking the guide
bar up and back towards the operator.
– Pinching the saw chain along the top of the
guide bar may push the guide bar rapidly
back towards the operator.
Either of these reactions may cause you to lose
control of the telescopic chain saw which could
result in serious personal injury. As a chain saw
user, you should take several steps to keep your
cutting jobs free from accident or injury.
Kickback is the result of incorrect or faulty use
of the product. Kickback can be avoided by
taking proper precautions as given below.
l) Only use replacement saw chains specified by
the manufacturer. Incorrect saw chains may
cause chain breakage or kickback.
m) If the bar is damaged and in need of replace-
ment, please consult your dealer.
WWW.VONROC.COM