Herunterladen Inhalt Inhalt Diese Seite drucken

Elektra Beckum PK 300 K Betriebs- Und Montageanleitung Seite 16

Praezisionskreissaege
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Scope of Application
This Elektra Precision Circular Saw is designed to perform rip and crosscuts in wood or wooden materials having a square or
rectangular cross section.
- Crosscuts should be performed only with the help of a mitre fence or the Sliding Carriage PK, available as optional accessory.
- Do not crosscut round stock, for ripping use the Square and Round Stock Jig available as optional accessory.
- Maximum saw blade diameter is 300 mm, the minimum blade diameter must be 250 mm.
User Responsibility
This machine will perform in conformity with the description contained tin the instructions provided. This machine must be checked
periodically. Defective equipment (including power cable) should not be used. Parts that are broken, missing, plainly worn, distorted
or contaminated, should be replaced immediately. Should such repair or replacement become necessary, it is recommended that
such repairs are carried out be qualified persons approved by Elektra Beckum or its representative. This machine or any of its parts
should not be altered or changed from standard specifications. The user of this machine shall have the sole responsibility for any
malfunction which results from improper use or unauthorized modification from standard specification, faulty maintenance, damage
or improper repair by anyone other than qualified persons approved by Elektra Beckum or its representative.
Product Liability/Warranty
We explicitly draw your attention to the fact that, under the current product liability regulations, Elektra Beckum does not have to
assume liability for any damages causes by its products, if such damages result from improper repair, use of replacement parts other
than genuine Elektra parts, or repairs not having been carried out by customer service or authorized service centres.
The three-phase motor of this machine is equipped with an automatically engaging mechanical motor brake, designed for a long
service life. If the braking action fades, and the time to standstill exceeds 10 sec, the brake has to be replaced.
Consult your dealer or authorized service centre.
Table of Contents
1
Specifications
2
3
4
5
6
7
8
9
1
Specifications
Saw table size
Table working height
Dept of cut at 90°/45°
Motor speed
Arbor speed
Main blade diameter
Cutting speed with Ø 300 mm blade
Motor capacity P
1
Motor voltage
Mains frequency
Mains fuse
Suction port diameter
Weight
Stock-no.
Noise Emission
The noise emission levels shown below have been established by measuring methods according to:
The correction factor K
1. PK 300 K operating under no load
A-sound pressure level L
A-sound power level L
2. PK 300 K operating under load
A-sound pressure level L
A-sound power level L
DIN EN 23 746;
DIN EN 31 202;
ISO 7960 appendix A.
has been established by DIN EN 31204.
3
74,3 dB(A)
pA
87,8 dB(A)
WA
84,7 dB(A)
pA
98,2 dB(A)
WA
10
11
12
13
14
15
16
17
Spare Parts Lists
710x900 mm
940 mm
104/70 mm
2800 rpm
3800 rpm
300 mm
60 mtr/sec
4200 W-
3 ~ 400 V
50/60 Hz
3 x 16 A time-lag
100 mm
90 kg
010 300 4209
16
ENG

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Pk 4200 dnb

Inhaltsverzeichnis