Cleaning And Maintenance - Royal Catering Rc-Dss12 Bedienungsanleitung

Install the gasket (22) with the inlet guard plate (23) on the ring of the kettle
lit receptacle. Secure the entire assembly with the compression coupling (24).
APPLIANE OPERATION
Place the material charge in the kettle. Secure the material charge by installing the
kettle lid (10) with the inlet guard place assembled on the kettle (1). Secure with
the safety latch (3).

3.4. Cleaning and maintenance

a) Let the appliance cool down completely before cleaning.
b) Only mild cleaning agents intended for surfaces in contact with food shall be
used to clean the appliance.
c) After each cleaning, dry all components well before the appliance is used
again.
d) Store the appliance in a dry and cool place, protected from moisture and direct
sunlight.
e) Regularly inspect the appliance for technical defects and damage.
f) Use a soft cloth for cleaning.
g) Do not clean with any sharp and/or metal implements (e.g. a wire brush or a
metal scraper) as these may damage the surface of the appliance.
h) Do not clean the appliance with acidic substances, medical products, thinners,
fuel, oil or other chemicals as they may damage it.