iFactory3D One Pro Aufbauanleitung Seite 16

V_97971.01
Input voltage
Make sure the selected input voltage is matching the voltage of your local power grid before turning
the machine on.
It can be switched between 110V and 220V.
Note: Labelling can be different for each machine. "110V" supports all voltages from 100V up to 120V
[US standard], while "220V" setting supports all voltages from 220V up to 240V [EU standard].
Both 50Hz and 60Hz are supported.
The Voltage that is visible on the red switch is the selected one.
16