iFactory3D One Pro Aufbauanleitung Seite 12

V_97971.01
Perform the following steps in both top corners:
Use one M5x20 screw to mount the back profile of ASM-Group2 to ASM-Group 3/4.
Use one M5x8 screw in the corner cube of AMS-Group2 to mount it to the profile of ASM-Group 3/4.
Use two M4x18 screws in the sinkings of the profiles ASM-Group 3/4 to connect them to the GT2-
tensioner (printed parts) of ASM-Group2.
12