Herunterladen Inhalt Inhalt Diese Seite drucken

Christopeit Sport WP5000 Montage- Und Bedienungsanleitung Seite 12

Holz-wasser rudergerät
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

CONTENTS
Page
Contents
12
Important recommendations and safety instructions
13
How to start
14
Transport and storage
14
Adjusting the pedals
14
Cleaning, checks and storage
15
Computer
15
Kinomap App
16
General training instructions
17
Rowing-training guide
18-20
Parts list – spare parts list
39
Exploded drawing
IMPORTANT RECOMMENDATIONS AND SAFETY INSTRUCTIONS
Our products are all TÜV-GS tested and therefore represent the
highest current safety standards. However, this fact does not make it
unnecessary to observe the following principles strictly.
1.
Assembly the machine exactly as described in the installation
instructions and use only the enclosed, specific parts of the machine.
Before assembling, verify the completeness of the delivery against
the delivery notice and the completeness of the carton against the
assembly steps in the installation and operating instructions.
2.
Check the firm seating off all screws, nuts and other connections
before using the machine for the first time and at regular intervals
to ensure that the trainer is in a safe condition. Carry out a visual
inspection of the water tank after training in order to detect any leaks
in the tank at an early stage and to avoid further damage.
3.
Set up the machine in a dry, level place and protect it from
moisture and water. Uneven parts of the floor must be compensated
by suitable measures and by the provided adjustable parts of the
machine if such are installed. Ensure that no contact occurs with
moisture or water.
4.
Place a suitable base (e.g. rubber mat, floor mat, wooden
board etc.) beneath the machine if the area of the machine must be
specially protected against pressure marks, wetness and dirt or etc.
5.
Before beginning training, remove all objects within a radius of 2
metres from the machine.
6.
Do not use aggressive cleaning agents to clean the machine
and employ only the supplied tools or suitable tools of your own to
assemble the machine and for any necessary repairs. Remove drops
of sweat from the machine immediately after finishing training.
7.
Attention! Systems of the heart frequency supervision can be
inexact. Excessive training can lead to serious health damage or
to the death. Consult a doctor before beginning a planned training
programme. He can define the maximum exertion (pulse, Watts,
duration of training etc.) to which you may expose yourself and can
give you precise information on the correct posture during training,
the targets of your training and your diet. Never train after eating large
meals.
8.
Only train on the machine when it is in correct working order.
Use original spare parts only for any necessary repairs. Attention!
Replace the worm parts immediately and keep this equipment out of
use until repaired.
9.
When setting the adjustable parts, observe the correct position
and the marked, maximum setting positions and ensure that the
newly adjusted position is correctly secured.
10.
Unless otherwise described in the instructions, the machine must
only be used for training by one person at a time. The exercise time
should not overtake 60 min./daily.
11.
Wear training clothes and shoes which are suitable for fitness
training with the machine. Your clothes must be such that they cannot
catch during training due to their shape (e.g. length). Your training
shoes should be appropriate for the trainer, must support your feet
firmly and must have non-slip soles.
DEAR CUSTOMER,
we congratulate you on your purchase of this home training sports
unit and hope that we will have a great deal of pleasure with it.
Please take heed of the enclosed notes and instructions and
follow them closely concerning assembly and use. Please do not
hesitate to contact us at any time if you should have any
questions.
12.
Attention! If you notice a feeling of dizziness, sickness, chest
pain or other abnormal symptoms, stop training and consult a doctor.
13.
Never forget that sports machines are not toys. They must
therefore only be used according to their purpose and by suitably
informed and instructed persons.
14.
People such as children, invalids and handicapped persons
should only use the machine in the presence of another person
who can give aid and advice. Take suitable measures to ensure that
children never use the machine without supervision.
15.
Ensure that the person conducting training and other people
never move or hold any parts of their body into the vicinity of moving
parts.
16.
At the end of its life span this product is not allowed to
dispose over the normal household waste, but it must be given to an
assembly point for the recycling of electric and electronic
components. You may find the symbol on the product, on the
instructions or on the packing. The materials are reusable in
accordance with their marking. With the re-use, the material
utilization or the protection of our environment. Please ask the local
administration for the responsible disposal place.
17.
To protect the environment, do not dispose of the packaging
materials, used batteries or parts of the machine as household waste.
Put these in the appropriate collection bins or bring them to a suitable
collection point.
18.
This machine has been tested in compliance with EN ISO 20957-
1:2013 + EN 957-7:1998 H/C. The maximum permissible load (=body
weight) is specified as 150 kg. This item's computer corresponds to
the basic demands of the EMV Directive of 2014/30EU .
19.
Do not overfill the water tank and pay attention to the max.
marking of water level. If the tank is overfilled, water can escape
during training or when the device is transported and cause damage.
Use normal tap water as this already has additives that do inhibit
algae growth. After about 6-12 months (depending on usage), it
makes sense to replace the water, as the additives have been used
up. Alternatively, you can use 1 chlorine tablet to treat the water and
protect the tank from sedimentations. A cleaning process of the inner
tank with all parts located there is then done automatically by the
training.
20.
The assembly and operating instructions is part of the product.
If selling or passing to another person the documentation must be
provided with the product.
21.
Wood is a natural product and is subject to a natural aging
process. Discoloration, as well as cracks and surface changes, can
therefore occur.
12
Top-Sport Gilles GmbH
Attention!
Before use
read operating
instructions!
GB

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

2265

Inhaltsverzeichnis