Restore The Factory Default Settings; Forgotten Password; Update The Software - Bose VIDEOBAR VB-S Bedienungsanleitung

Restore the Factory Default Settings

Restoring the factory default settings will do the following:
Clear the list of Bluetooth devices paired to the VB‑S.
Clear the camera presets (Home, Preset 1, and Preset 2).
Return all camera, microphone, and speaker settings to their default
values. (Many of these settings are configured in the Bose Work
Configuration software or Management software.)
Reset the administrator password to
Note: We recommend changing the password after resetting it.
To restore all settings of the VB‑S to their factory defaults, press and
hold the Home button and Autoframe button on the remote control
simultaneously for 5 seconds.
A small section of lights in the center of the light bar will pulse white
repeatedly. The lights will then move outward from the center until the
whole light bar is lit solid white. The lights will then fade out. When this
process is completed, the VB‑S will restart with its factory default settings.

Forgotten Password

If you have forgotten the password to access the Administrator
configuration settings, you must restore the factory default settings to reset
the password (see Restore the Factory Default Settings (Page 45)).
Note: We recommend changing the password after resetting it.

Update the Software

You can use the Bose Work Configuration app and Bose Work Management
app to check for and install VB‑S firmware updates. See Software
Applications (Page 23) to learn how to download and access these
software apps.
If you are using the Bose Work Configuration WebUI to configure the VB‑S,
you may not be able to automatically check or update the firmware from the
online Bose server unless your computer is also connected to the internet.
If you cannot access firmware updates while using the WebUI, do one of
the following instead:
Use the Bose Work Configuration app.
Use the Bose Work Management app.
Download the firmware file directly to your computer, and then use the
Bose Work Configuration WebUI to update the firmware as if it were a
previous version.
CA RE A N D M A IN T E N AN CE
4 5 E N
Bose123!