Enable/Disable Autoframing - Bose VIDEOBAR VB-S Bedienungsanleitung

Enable/Disable Autoframing

To enable or disable the camera's autoframing feature, press the Autoframe
button on the remote control.
When autoframing is enabled, the camera will automatically and
continuously adjust the pan, tilt, and zoom settings to include all
participants in the room in the field of view. A small section of lights in the
center of the light bar will be lit solid white.
Note: Adjusting the pan, tilt, or zoom settings or selecting Home,
Preset 1, or Preset 2 will automatically disable autoframing.
When autoframing is disabled, adjust the camera's pan‑tilt‑zoom (PTZ)
settings manually. The whole light bar will be lit solid white.
OP ER ATI O N
3 8 E N