Herunterladen Inhalt Inhalt Diese Seite drucken

Mechanical Installation; Before The Assembly - Veratron VL FLEX 52MM Serie Bedienungsanleitung

Intelligent battery monitor kit
Vorschau ausblenden Andere Handbücher für VL FLEX 52MM Serie:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

MECHANICAL INSTALLATION

Before beginning, disconnect the negative terminal on the battery, otherwise you risk a short circuit.
If the vehicle is supplied by auxiliary batteries, you must also disconnect the negative terminals on these
batteries! Short circuits can cause fires, battery explosions and damages to other electronic systems.
Please note that when you disconnect the battery, all volatile electronic memories lose their input values
and must be reprogrammed.

BEFORE THE ASSEMBLY

1.
Before beginning, turn off the ignition and
remove the ignition key. If necessary, remove the
main circuit switch
2.
Disconnect the negative terminal on the battery.
Make sure the battery cannot unintentionally
restart.
3.
Place the device at least 300 mm away from any
magnetic compass.
WARNING
MECHANICAL INSTALLATION
B001025

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

Vl flex 52 ibm 12vVl flex 52 ibm 24v

Inhaltsverzeichnis