ELECTRICAL INSTALLATION
Mount as the next step the Intelligent Battery Sensor onto the
negative pole of the battery.
Then fasten the IBS onto the battery pole clamp with a
tightening force of 5±1 Nm.
Use a torque key to adjust it to 5 Nm.
Connect the Hirschmann plug next to the black ring-type
connector (2 poles for 12V-Variant/ 3 poles for 24V) to the
battery sensor.
Connect the resistive level sensor plug (AMP SuperSeal 1.5 series
2 Pin) to the Level Sensor if there is one in your system.
Connect the VL Flex 52 connector (Tyco / Hirschmann 8 pole
MQS plug) to the instrument.
Use the 2-pole connector to connect the external pushbutton.
B001025