CONFIGURATION
INTELLIGENT BATTERY MONITOR APP
To configure the IBM system, some parameters must be calibrated, like the gauge type, the sensor and its
calibration or the warning threshold.
This is possible through the "VL Flex Configurator" smartphone App, which can be downloaded free of
charge from the stores of both Android and iOS devices.
A simple and detailed explanation of the configuration process is also available as in-app instructions.
Thanks to the passive embedded NFC receiver, the VL Flex 52 can be configured, as described below,
without the need of a power supply.
The setup of the VL Flex device is an intuitive three-step process.
Please remember that you must READ from the device before being able to change and download the
configuration to the instrument.
1. READ
INTELLIGENT
BATTERY MONITOR
2. CONFIGURATE
CONFIGURATION
3. WRITE
B001025