The All-In-One Instrument; Contactless Configuration - Veratron VL FLEX 52MM Serie Bedienungsanleitung

INTRODUCTION

THE ALL-IN-ONE INSTRUMENT

The VL Flex device can easily be configured to be the instrument you need - thanks to its sun-readable 1.44"
TFT display embedded into a standard 52 mm instrument housing.
The supported analog inputs allow you to directly read from your level sensors and the Intelligent Battery
Sensor can be read through the LIN 2.0 interface.
The simple but effective graphic design can be set up in a single or dual layout, presenting the data in a clear
and intuitive form, while the colored bar graph and the alarm display allow you to visually understand your
data.

CONTACTLESS CONFIGURATION

Thanks to the contactless configuration you can setup your all-in-one instrument with a simple tap!
Launch the companion App and define your settings through the user-friendly interface, then simply hold
your mobile device in proximity of the VL Flex device to transfer the configuration.
Thanks to the embedded passive antenna the configuration can be done without powering up the device!
B001025