DISPLAY LAYOUT
DISPLAY LAYOUT
SCREEN CAROUSEL
There are four different display layouts which can be scrolled through by pressing the push button.
With every push the display changes to the next screen showing the next set of values.
After the last screen, the display will roll over to the first one.
The fourth screen shows the data from the resistive level sensor if the analog input is activated.
The type of liquid (fuel or fresh water) must be configured on the VL Flex via the smartphone App during the
system configuration.
If there isn't any sensor configured, the screen carousel only contains the first three screens.
First Screen
On the upper half the batteries voltage is displayed. The unit is
Volts.
On the lower half the current is displayed in Amps.
The little arrow indicates in which direction the current flows. If the
battery is being charged the arrow appears in green. While it's red
and pointing upwards during discharging.
B001025