teutonia TeamCosmo Bedienungsanleitung Seite 11

Unfolding the chassis
Please unfold the chassis on a surface which cannot
scratch the front structure of the chassis. Press in the
transport bracing (1) and pull up the handle (2) till the
handle locks (3) engage on both sides.
WARNING: Ensure that all the locking devices
are engaged before use. Red label under-
neath the tensioning sleeves must not be vis-
ible.
Folding the chassis
Please unfold the chassis on a surface which cannot
scratch the front structure of the chassis. Pull up both
tensioning sleeves 1 on both sides as far as they will go.
Then press the handle 2 down. Now you can additionally
make the storage dimensions smaller by folding down
the upper part of the handle.
Assembling and removing the wheels
Before assembling or remov-
ing the wheels, press the
locking spring 1. When as-
sembling the wheels, make
sure that the locking spring
engages properly.
Removing the swivel wheel
Assembling the wheels
TEAM COSMO
INT
11