Scope Of Supply - Fronius OPT/i TPS SpeedNet Connector Installationsanleitung

General
Safety
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
▶
▶
Danger from electric current.
This can result in serious injury and damage to property.
▶
▶
▶
▶
▶
Risk of injury from hot system components.
This can result in severe scalds.
▶

Scope of supply

OPT/i TPS SpeedNetConnector
12
WARNING!
All the work and functions described in this document must only be carried out by
trained and qualified personnel.
Read and understand this document.
Read and understand all the Operating Instructions for the system components,
especially the safety rules.
WARNING!
Before starting work:
turn the power source mains switch to the "O" position
disconnect the power source from the mains
ensure that the power source remains disconnected from the mains until all work
has been completed
After opening the device, use a suitable measuring instrument to check that electri-
cally charged components (e.g. capacitors) have been discharged.
CAUTION!
Before starting work, allow all hot system components to cool down to room tempe-
rature (+25°C, +77°F).
(1)
(2)
(3)
(4)
(1) Cable harness
(2) Cover
(3) 2 screws 4x12 TX20
(4) 2 cable ties
Not shown:
Installation instructions