Transport And Handing; Installation - POCO line 5959043/00 Bedienungsanleitung

TRANSPORT AND HANDING

When transportation, hold the base and lift the refrig-
erator carefully with an angle inferior at 45 degree.
Never hold the door handle as support. Never place it
upside down nor horizontally. Push refrigerator on its
basis and place it thanks to its roller feet.

INSTALLATION

This refrigerating appliance is not intended to be used
as a built-in appliance.
To fix stably, the appliance must be placed on a flat
and solid surface. It should not be laid on any soft ma-
terial.
Choose a location where there is no heat source. Keep
the refrigerator away from direct sunlight or other
appliance producing heat.
Choose a dry and well-ventilated place where there is
no corrosive air.
In order to improve efficiency of the cooling system
and save energy, it is necessary to maintain good ven-
tilation around the appliance for the dissipation of
heat. For this reason, sufficient clear space should be
available around the refrigerator.
The appliance is supplied with two plastic spacers.
After installation of these spacers, the appliance
cannot be pushed against the wall to maintain proper
ventilation. Insert the spacers into the relevant open-
ings on the back of the appliance, then screw the spac-
ers tightly. Place the appliance against a wall with a
free distance that not exceeding 75 mm but more than
50mm.
42