Herunterladen Inhalt Inhalt Diese Seite drucken

HOMCOM A90-262 Montageanleitung Seite 10

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

COMPUTER
FUNCTION BUTTON
PRESS TO SELECT FUNCTIONS PRESET, OR HOLD ON CAN BE
TOTAL RESET
FUNCTIONS
STOP
: WHEN STOP PEDALING, " STOP " DISPLAYS ON
LCD.
STEP/MIN
(
or
STRIDES/MIN):
STEP/MIN
(
or
STRIDES/MIN):
Scan
each
function
SCAN
:
Scan
each
function
SCAN
:
Determine
the
length
TIME:
TIME:
Determine
the
length
Show
the
CALORIES:
CALORIES:
Show
the
COUNT:
Accumulate
the
COUNT:
Accumulate
the
NOTE
1. WITHOUT ANY SIGNAL FOR A PERIOD OF 4 MINUTES, THE LCD DISPLAY WILL SHUT OFF
AUTOMATICALLY, AND ALL PREVIOUS WORKING VALUES ARE TOTAL RESET
2. WHEN THERE IS SINGAL IN, THE MONITOR IS AUTO POWER ON.
3. IF IMPROPER DISPLAY ON MONITER, PLEASE-INSTALL THE BATTERIES TO HAVE A
GOOD RESULT.
HOW TO REMOVE BATTERY
1. Pull out the computer from the equipment and place one SIZE-AAA battery into battery housing on back of
monitor, please refer to below illustrations.
2. Insure the battery is correctly positioned and battery springs are in proper contact with battery.
3. Then put the computer back into the original place and make sure it completely set down in position.
4. Battery life is approx. 1 year under normal usage.
5. If the display is illegible or only partial segments appear, remove batteries and wait 15 sec. before reinstalling.
6. Removing the batteries will erase computer memory.
7. If the step counter does not work, please carefully remove the computer and adjust the height of the
sensor manually,until the computer can display the number of steps.
WARNING: The battery is environmental, so the used battery should be thrown into the reference
dustbin.
Display
Display
strides
strides
in
sequence
in
sequence
of
workout
session
of
workout
session
calories
burned.
calories
burned.
number
of
stride
during
number
of
stride
during
in
in
every
every
minute
minute
workout
session
workout
session
10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis