Battery Type; Package Contents; Intended Use - DeWalt XR LI-ION DCS7485 Originalanweisungen

Have defective cords replaced immediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indoor use.
Discard the battery pack with due care for
the environment.
Charge D WALT battery packs only with designated
e
D WALT chargers. Charging battery packs other
e
than the designated D
D WALT charger may make them burst or lead to
e
other dangerous situations.
Do not incinerate the battery pack.
Use: Use without transportation cap, Wh rating
indicates 108 Wh (1 battery with 108 Wh).
Transport: Transport with built-in transport cap, Wh
rating indicates 3 x 36 Wh (3 batteries of 36 Wh).

Battery Type

The DCS7485 operates on a 54 volt battery pack.
These battery packs may be used: DCB546. Refer to Technical
Data for more information.

Package Contents

The package contains:
1 Partly assembled machine
1 Rip fence assembly
1 Mitre fence
1 Saw blade
1 Upper blade guard assembly
1 Throat plate
2 Blade wrenches
1 Dust extraction adapter
1 Battery charger (T2)
2 Li-Ion battery packs (T2)
1 Instruction manual
• Check for damage to the tool, parts or accessories which may
have occurred during transport.
• Take the time to thoroughly read and understand this manual
prior to operation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual before use.
WALT batteries with a
e
Wear ear protection.
Wear eye protection.
Wear face mask.
Keep hands away from cutting area and the blade.
Carrying point.
Remove battery when changing blade, installing/
removing accessories and making adjustment/repairs.
Date Code Position (Fig. A)
The date code 49 , which also includes the year of manufacture,
is printed into the housing.
Example:
2016 XX XX
Year of Manufacture
Description (Fig. A, D)

WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.
Table
1
Blade
2
Rip scale indicator
3
Fine adjust knob
4
Rail lock lever
5
Blade height adjustment
6
wheel
Bevel lock lever
7
ON/OFF assembly
8
Mounting holes
9
Mitre gauge
10
Blade guard assembly
11
Battery
12
Battery release button
13

Intended Use

Your table saw has been designed for professional ripping,
cross-cutting, mitreing and bevelling with various materials as
wood analogous materials and plastic.
DO nOT use for cutting metal, cement board, or masonry.
DO nOT use under wet conditions or in presence of flammable
liquids or gases.
These table saws are professional power tools.
DO nOT let children come into contact with the tool.
Supervision is required when inexperienced operators use
this tool.
EnGLIsh
Carry handle
14
Dust collection port
15
Guard dust collection port
16
Throat plate
17
Rip fence
18
Rip fence latch
19
Narrow ripping fence/
20
support extension
Blade wrenches (stored
21
position)
Push stick (stored position)
22
Riving knife (non thru
23
sawing) (Fig. D)
Mitre gauge storage
24
49