Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Using this unit
! This function is disabled while pausing. For
more details about pausing, refer to Pausing
on page 4.
! Depending on the band, text information can
be changed.
! Text information items that can be changed
depend on the area.
Listening to a recent broadcast
(time shift)
You can navigate through recent broadcasts
from the selected Service Component.
1
Press
/DIMMER to switch to time shift
mode.
Press again to resume the live broadcast.
2
Press c or d to adjust the playback point.
! Press c to skip back one minute.
! Press d to skip forward one minute.
This unit stores recent broadcasts to memory
automatically. The memory capacity of this unit
will vary depending on the bit rate of the Service
Component used. The approximate memory ca-
pacity is five minutes for 192 kbps.
Stored selections that are older than what can
be stored in the memory will not be available.
Selecting a Service Component
You can select a Service Component from the
following service list.
1
Press
(list) to switch to the service list
mode.
2
Turn M.C. to change the service list and
press to select.
Once selected, the following Service Component
functions can be adjusted.
SERVICE (service label)
You can select a Service Component from the list
of all components.
1 Turn M.C. to select a Service Component.
2 Press M.C. to receive a broadcast from the se-
lected Service Component.
Using alphabet search
1 Press
(list).
2 Turn M.C. to select a letter.
3 Press M.C. to display the alphabetical list.
4 Turn M.C. to select a Service Component.
5 Press M.C. to receive a broadcast from the se-
lected Service Component.
PROGRAM TYPE (PTY label)
You can select a Service Component from PTY in-
formation.
1 Turn M.C. to scroll to the desired PTY informa-
tion and press it to select.
NEWS/INFO—POPULAR—CLASSICS—
OTHERS
2 Turn M.C. to select a Service Component.
3 Press M.C. to receive a broadcast from the se-
lected Service Component.
ENSEMBLE (ensemble label)
You can select a Service Component from the rele-
vant ensemble.
1 Turn M.C. to scroll to the desired ensemble
and press it to select.
2 Turn M.C. to select a Service Component.
3 Press M.C. to receive a broadcast from the se-
lected Service Component.
Updating service list information
You can receive updates to the service list.
% Press and hold down
(list).
To cancel, press
(list) again.
Using this unit
Function settings
1
Press M.C. to display the main menu.
2
Turn M.C. to change the menu option
and press to select FUNCTION.
Once selected, the function below can be ad-
justed.
S.FOLLOW (alternative Service Component
search)
If the tuner cannot get good reception, the unit
will automatically search for another ensemble
that supports the same Service Component. If no
alternative Service Component can be found or re-
ception remains poor, this function will automati-
cally switch to an identical FM broadcast.
1 Press M.C. to turn alternative Service Compo-
nent search on or off.
Radio
Basic operations
Selecting a band
1 Press BAND/
until the desired band (FM1,
FM2,FM3 for FM or MW/LW) is displayed.
Switching preset stations
1 Press c or d.
! Select PCH (preset channel) under SEEK to
use this function.
Manual tuning (step by step)
1 Press c or d.
! Select MAN (manual tuning) under SEEK to
use this function.
Seeking
1 Press and hold c or d, and then release.
You can cancel seek tuning by briefly pressing
c or d.
While pressing and holding c or d, you can
skip stations. Seek tuning starts as soon as
you release c or d.
Notes
! For details about SEEK, refer to SEEK (left/
right key setting) on page 6.
! This unit's AF (alternative frequencies
search) function can be turned on and off.
AF should be off for normal tuning operation
(refer to AF (alternative frequencies search)
on page 6).
Storing and recalling stations
for each band
Using preset tuning buttons
1
To store: Press and hold down one of the
preset tuning buttons (1/
to 6/
) until
the number stops flashing.
2
To recall: Press one of the preset tuning
buttons (1/
to 6/
).
Switching the display
Selecting the desired text information
1 Press DISP to cycle between the following:
! FREQUENCY (program service name or
frequency)
! BRDCST INFO (program service name/PTY
information)
! CLOCK (source name and clock)
Section
02
5
En
Werbung
Inhaltsverzeichnis
