Ptz Control - SKYTRONIC 351.115 Gebrauchsanleitung

5.4 Menu Lock
Considering a system safety feature you can click [Menu Lock] menu to lock menu when leaving the DVR
shown as Picture 5-48). If you want to login in the DVR again, you would input device code and password shown as
Picture 5-49.
Picture 5-48
Note: You can set permissions of common user over the DVR's specific functions and settings, but
the Administrator can use and set all menu items and function.
5.5 Record Search
Click pop-up menu video search to enter into [Video Search] menu you search files and playback recordings.
For more information on this operation refer to the previous section 5.24.

5.6 PTZ Control

Open auto cruise function on PTZ setting menu if you want to setup cruise function (system default: on), and
set up cruise channel, cur point and total quantity and stop time etc.
Channel: select one channel with PTZ camera
Total: set up pre-set point quantity
Pre: indicates starting point cruised. System default point is 01.
STP：sets the stop time at each point
: allow you go to a specific preset point.
: allow you set a set of specific preset points of a PTZ camera.
1、Select a camera you desire to set a preset point;
2、Adjust the camera in a desired direction
3、Click [Set] to set the point as preset point
4、Click [Save] to save the preset point
5、Follow the above steps to add one more preset point.
: allow you delete one selected preset.
: allow you save relative parameters
: allow you exit PTZ control interface
<Start Cruise>
Picture 5-50 Picture 5-51
Picture 5-49
Picture 5-52