SKYTRONIC 351.115 Gebrauchsanleitung Seite 31

Click <PTZ> to set PTZ parameter value, details please refer to section 5.3.6.3-<PTZ set>.
As for 3G network and motion parameters set, please refer to the previous section.
On <Motion> screen, allow you set motion parameter for each channel, including its sensitivity, motion area etc
shown as Picture 6-18 and Picture 6-19.
Device Manage
Extend [Device Manage] option to enter into sub menus – System set shown as Picture 6-20,
and Authority set shown as Picture 6-21,
Picture 6-18
Picture 6-16
Picture 6-17
Picture 6-20
Picture 6-21
Picture 6-19