SKYTRONIC 351.115 Gebrauchsanleitung Seite 18

You could freely select buzzer alarm or not and alarm output time for all the alarm types, and for the MD alarm and
I/O status alarm you could set email and full screen reminder.
Alarm Type
Video Loss
Motion Detection
I/O Status
HDD loss
EMAIL Setup
Click [Email Set] to enter into the interface shown as Picture 5-26.
On the [EMAIL] screen, when Enabling [Email] option, you can set its parameters shown as Picture 5-27.
SSL: is a security link transport protocol. You can encrypt your communication info (including your email) using
SSL to prevent hackers from monitoring your email or communication info and even your password.
Generally Gmail.com server set SSL to [On], and other mail server to [Off]. If your setting is still not right,
please contact the web site where you have applied for your email box to get SMTP port and SSL of mail box.
SMTP Port: indicates sender port of SMTP server. Generally the SMTP port value is 25, but there are
exceptions, for example, SMTP port of G-mail server should be 465.
SMTP server: indicates server address you use.
Sender email: indicates sender's email address. The email address should be consistent with the server you
use. That is to say, when you use email address – aaa@gmail.com, the according server should be
smtp.gmail.com.
Receiver address: indicates receiver's email address. The email address is used to receive image
transmitted from motion detection alarm of DVR. Please clear the images you have received as soon as possible to
avoid overloading your email account.
Email Test: Click the button to check your SMTP port, server, sender and receiver address. Once the
parameters are wrong, system will return misinformation back to inform user modified. Before you perform <Email
Test> function, please make sure your email server support SMTP and SSL service.
Note: Sender email is required to enable IMAP/POP3/SMTP function (details please refer to Picture 5-28 &
Picture 5-29 (a & b), which show IMAP/POP3/SMTP Enable setting function for Gmail, QQ and SINA mail). Login
your GMAIL ID and turn to Settings page. Find out Forwarding and POP/IMAP option and then tick-select [enable
IMAP] option.
Sends alarm when DVR can't receive video signal (such as camera damage, cable broken
or damaged or power supply malfunction).
When an object moves into motion detection area, alarm will be triggered. You can adjust
sensitivity level to suit the needs of your actual application environment.
System can convert alarm signal triggered by external sensor into signal identified by
system.
When Hard Drive is not detected (HDD damage, power supply malfunction), or HDD
auto-overwrite is off, and free space is not enough, an alarm will be triggered.
Picture 5-26
Function
Picture 5-27