Motion Detection - SKYTRONIC 351.115 Gebrauchsanleitung

5.3.6.4 Mobile setup
The DVR is currently compatible with mobile phones running Andriod, Windows Mobile，Symbian, Iphone and
Blackberry operating systems on 3G networks. Details access methods please refer to separate Mobile phone
Access Instructions.
Click [Main menu Device Mobile] to enter into [Mobile] menu shown as Picture 5-31.
User Name: indicate user name of DVR, and system supports up to 15 characters.
User password: indicate user password of DVR, and system supports up to 15 characters.
Server port: Mobile monitoring port. Setting value is adjustable between 1024 and 65535.
Explanation: Please connect DVR to Internet before setting DVR port number and the server port no is not
equal to network menus.

5.3.6.5 Motion Detection

Click [Main menu Device Motion] to enter into the [Motion Detection] menu shown as Picture 5-32.
The [Motion detection] Menu has three sections, including Channel Status, Sensitivity and Motion area.
Channel: This option allow you enable motion detection on any channel.
SENSITIVITY: This option allows you to set sensitivity level of motion detection from higher to low with 8 being
the most sensitive.
MD AREA: This option allows you select the area you want to be sensitive to motion.
Copy to: allow you copy current channel parameters to any other channel or all channels.
Each channel is separated into 15X12 grids for PAL system and 15X10 grids for NTSC system. When any
object moves into the motion detection area, and the area where the object is located is displayed in red recording
will be triggered. In the semi-transparent area the motion detection is off.
5.3.7 System
<System> menu include the below sub-menu-Time set, User password, A/V set, Language, System
Information and system maintain.
After entering into <System> menu, you are allowed to set time/date, password, language and A/V, check
system information and perform system maintenance.
Picture 5-32 Picture 5-33