Motion Detect - SKYTRONIC 4CH Gebrauchsanleitung

3.1 Access information setup
Turn into setup menu, and fill in the information according to your DVR Mobile settings.
Press Play button to start mobile surveillance.
Press channel selection keys to switch camera picture.

5.2.6.5 Motion Detect

Picture 5-38
Picture 5-39
Server IP: input the IP address or domain name to visit your DVR
Port: same with the server port you have set in your DVR mobile settings
User ID: same with the user name you have set in your DVR mobile
settings
Password: same with user password you have set in your DVR mobile
settings
After finishing the settings, press "Back" button to the main interface.
Click [Main Device Motion] to enter into the [Motion Detection]
menu to setup motion detection recording.
The [Motion detection] Menu has three sections, including
Channel Status, Sensitivity and Motion area.
Channel STATUS: This option allow you enable motion detection
on any channel.
SENSITIVITY: This option allows you to set sensitivity level of
motion detection from 1 to 4 with 4 being the most sensitive.
MD AREA: This option allows you select the area you want to be
sensitive to motion. The channel is separated into a 13*10 area. When
any object moves into the motion detection area, and the area where
the object is located is displayed in red recording will be triggered. In
the semi-transparent area the motion detection is off.