Body Fat Test; Energy Saver; Power Supply - Zipro Tekno Bedienungsanleitung

BODY FAT TEST

Press the PROGRAM (P) button until FAT is displayed on the panel.
Use MODE (M) to enter parameters:
o F1 – gender – 01 male / 02 female
o F2 – age – 10–99
o F3 – height – 100–220
o F4 – weight – 20–150
Use SPEED +/- to set parameters.
After parameters are selected, F5 is displayed. Put both hands on the heart rate sensors. After 5–6
seconds, the computer displays FAT information. FAT measures the relation between your height
and weight, not body proportions.
The correct result is between 20 and 25. A value below 20 means underweight, 26–29, overweight,
and above 29, obesity.
NOTE! The results must not be used for diagnostics or any medical purposes.

ENERGY SAVER

The treadmill computer automatically goes into the energy saving mode if no action is performed
within 10 minutes. Press any button to wake the system up.

POWER SUPPLY

Power cord 230V
Operating temperature 0 to +40°C
Storage temperature: -10 to +60°C
EN
36