Using The Pedals - Korg EC150 Bedienungsanleitung

Hold down the REVERB or CHORUS button, and press either the PIANO 1/L,
1
PIANO 2/M, or E.PIANO1/H sound selection button to select the reverb or chorus
depth.
Button
PIANO 1/L
PIANO 2/M
E.PIANO 1/H
When the reverb or chorus is assigned, release the REVERB or CHORUS button.
2
To check the currently selected reverb or chorus depth, hold down the REVERB or
CHORUS button, and look at which of the above LEDs is turned on.
To turn the reverb or chorus off, press the REVERB or CHORUS button. The LED
on the button will turn off.

Using the pedals

This instrument has three pedals: damper, sostenuto, and soft. They can be used to
make your performance more expressive.
Damper pedal.
tained, and a rich resonance will be produced. The depth at which you press the
pedal will adjust the degree of the damper effect (Half-damper effect).
Sostenuto pedal.
already held while the pedal was pressed, so that these notes will continue sustain-
ing while the pedal remains pressed. The damper effect will not apply to any new
notes played after the sostenuto pedal is pressed.
Basic functions
Reverb depth
Light reverb
Normal reverb
Deep reverb
Soft pedal
Sostenuto pedal
While you continue pressing the pedal, the sound will be sus-
The damper effect will be applied only to notes which were
Chorus depth
Light chorus
Normal chorus
Deep chorus
Damper pedal
19