Linak DESKLINE XDLB-Serie Bedienungsanleitung Seite 37

Desk settings
In the "Desk settings" section you can change your favourite positions, change the desk name, connect to
another desk, set the actual desk height, enable/disable "Automatic drive", and switch between "Owner" and
"Guest".
Connecting to another desk
Steps 1 and 2 are only to be performed if the app is already connected to a desk.
1. Press/click on the connected desk to disconnect.
2. Confi rm that you want to disconnect.
3. Press/click on a new desk to connect.
4. Choose between "Owner" and "Guest".
5. Wait until the app is connected to the desk.
32/38 EN 114065
APP
Set desk name
Change the name of the connected product to personalise the user experience of the app. Changing the desk
name in the app will aff ect the Bluetooth
VXDLR - DPG1C display.
Set desk height
Set the actual height of the desk. An illustration guides you on how to measure. Choose height units (cm or
inches).
Automatic drive
If "Automatic drive" is enabled, you can make the desk adjust non-stop to any favourite position by just
pressing/clicking the relevant button once. This function is called "one-click-drive". It is only possible to enable
"Automatic drive" if the app is connected to the "full" versions of the DPG1B/C,
not the "limited" versions.
An animation shows you how this feature works.
If you use the app to adjust the desk height, the desk will not stop at any intermediate favourite positions as it
does if you use the DPG for desk height adjustment.
You have to accept the terms, i.e. accept the responsibility of any danger that can occur under these
circumstances, in the pop-up notifi cation before this feature
can be enabled.
If you press/click any button, close the app or tilt the DPG during this automatic drive, you will interrupt the
drive of the desk.
System
In the "System" section you can switch language. The language is default set to the language of the operating
system of your smart device/computer. Choose between eight diff erent languages in the app. The available
languages are: English, Korean, Japanese, Chinese, French, Italian, German, and Spanish.
This change does not aff ect the language in the display of a VXDLR - DPG1C.
You also have the possibility of changing the units. Switch between "cm" and "inch"for height and "kg" and
"lbs" for weight.
Support
In the "Support" section you can fi nd a pairing guide which helps you pair the app to a desk.
About
The "About" section contains the terms and conditions for using the Desk Control™ app as well as the LINAK
privacy policy.
According to the privacy policy, LINAK respects your privacy and does not access or use any data entered in the
app (such as favourite positions, gender, height and weight) or collected by the app (statistics). The information
is stored only on your device and can therefore only be accessed in your device.
About
Use your desk
Link to the "Made to Move" site where you can get guidance on how to use a sit/stand desk correctly.
Product information
Link to the LINAK website with information about this app.
Support
Link to the LINAK website with troubleshooting videos on the DPG products.
ID so the new name will be shown on the smart device and in the
®
33/38 EN 114065
APP