Vxdlb - Dpg1B - Linak DESKLINE XDLB-Serie Bedienungsanleitung

Instruction manual

VXDLB - DPG1B

The VXDLB - DPG1B has three operation buttons.
Introduction to DPG DPG assembly
Each button has a specifi c function:
Symbol Description Function
Reminder Setting reminders
Bluetooth Connecting the Desk Control
®
Favourite Saving favourite positions
Operate the desk panel by tilting it.
1. Tilt and hold up VXDLB - DPG1B to drive desk up, press and hold down VXDLB - DPG1B to drive desk down.
2. Release VXDLB - DPG1B when you have reached your requested position.
Figure 20: Tilt and hold the VXDLB - DPG1B to drive the desk
up
8/38
App via Bluetooth wireless technology
TM ®
Figure 21: Press and hold the VXDLB - DPG1B to drive the
desk down
EN 114065
VXDLB
Desk height limits
In case the desk cannot be operated in its entire span (e.g. a shelf is blocking the upwards movement or a filing
cabinet is placed under the desk and blocking the downwards movement), it is possible to set an upper limit
and a lower limit for the desk height.
Note:
It must always be possible to drive the desk to its minimum height in
case initialisation is required.
During initialisation items placed under the desk must be removed.
Setting upper limit
1. Adjust desk to maximum allowable height.
2. Press and tilt VXDLB - DPG1B up at the same time for 8 seconds until light flashes.
3. Release and VXDLB - DPG1B.
Setting lower limit
1. Adjust desk to minimum allowable height.
2. Press and press VXDLB - DPG1B down at the same time for 8 seconds until light flashes.
3. Release and VXDLB - DPG1B.
Favourite positions
Saving favourite positions 1 and 2
1. Adjust desk to a preferred position.
2. Press button for two seconds.
The light strip flashes white two times to indicate that saving the position is in progress. Not until the light strip-
becomes static white, has the position been saved.
If the user adjusts the desk to another position and saves this position, it will overwrite the favourite position
closest to the current position.
Driving to favourite positions
After saving the favourite positions, the user can reach the positions simply by tilting/pressing the VXDLB -
DPG1B.
1. Tilt/press and hold - when a saved position has been reached, the desk stops.
2. Release VXDLB - DPG1B within one second.
This way the user can easily change between sitting and standing height without looking at the VXDLB - DPG1B
in the meantime. The VXDLB - DPG1B will stop at the saved favourite position(s) which means up to two different
positions during the stroke length of the desk.
When the desk stops at a favourite position, the user can
• keep tilting/presssing the VXDLB - DPG1B for more than one second
or
• release the VXDLB - DPG1B and immediately tilt/press it again.
The desk will move past the favourite position
and continue its movement.
9/38 EN 114065
VXDLB